 Commercial Contact | Truck Sampler RAKORAF
The Rakoraf Sampler is the fastest and easiest method to take an accurate sample from an open trailer.
The sample can be taken if the trailer is before or on the weighbridge. The telescopic arm with the core tube can be extended or retracted, be turned horizontallly
0-350°, and can also be raised or lowered vertically.
When the core tube is forced downward into the load, the grain, due to the down pressure, is pushed upwards into the inner chamber of the core tube and carried to the receiving chamber located in the weighbridge office via steel and PVC tubing.
The air circulation system with the patended CONVAC system secures a correct sample eliminating the „vacuum cleaner effect“. This has been certified by independent SjF test report no. 758.
Each time the probe is ed into the load a sample is taken. From a 1 metre load a 500 gram sample is taken. Sample size is independent of the time the probe is ed in the load. The sample is taken right to the bottom of the material layer, because smaller impuritues settle at the bottom. When the core sampler stops, the samples is automatically emptied out from the receiving chamber.
Trading
- available for export
- packed for land or sea transport |
ENGOREPROD 1057-2979 20081204
 Send to a friend
Copyright © 1999-2008 Engormix.com - All Rights Reserved
|
|
|
This company has no videos published. |
|
This company has no articles published. |
|
This company has no professionals registered. |
|
This company has no participation in forums. |
|
This company has no news published. |
|
This company has no participation at events. |
|
Who we are / Products and Services
