|
PELLET MILL SZLH400 
Convertible frenuency speed adjustment is selected to control feeding,which can efficiently prevent feeding because of unstable voltage and ensure material feeding.
The gerbox is improved by American technology with reference to the same of Zheng Chang 508 pellet mill which has the advantages of large capacity to stroe oil and can efficiently absorb the main driving,reduce oil temperature and lower temperature rising of the main driving system.
Full stainless steel lengthened and widened strong conditioner inner diameter x Length=¡é400*3000. The inside capacity is increased by 2.6 times.The ripening time is increased and the conditioning time is 2.5 time of that of conventional conditioner.The feed return is 3-5% higher than the old types.
Jacket axial steam spray system is used for the conditioner. The original type of radial steam inlet is changed to axial steam inlet so that the contacting efficiency between steam and material is improved as well as the ripening degree and steam spraying back is prevented.
The iron removing system is specialty placed in between feeder and conditioner to remove the iron more efficiently.
Imported bearing is used for driving iquill shaft bearing with long service life and low noise.
The door is fully made of stainless steel for strong anti-corrosion,long service life and low maintenance cost.
Parameter
Model |
Power Of Main Motor (kw) |
Capacity (t/h) |
Power Of Feeder Screw (kw) |
Power of Conditioner (kw) |
Die Dia (mm) |
Pellit Sizes (mm) |
SZLH400 |
75/90 |
3¡«12 |
1.5 |
5.5 |
¡é400 |
¡é2¡«¡é18 |
ENGOREPROD 748-1967 20080706
 Send to a friend
Copyright © 1999-2008 Engormix.com - All Rights Reserved
|
Who we are / Products and Services
