|
Elevator buckets of Yellow Jacket Series(Wear resistant lips) Sell Elevator buckets of Yellow Jacket Series
Prime Virgin HDPE
Thicker leading edges for increased abrasion resistance
Reinforcing ribs for greater structural integrity
Optimum discharge angle
Larger water level for higher capacities
Buckets NEST together for lower freight costs
Deep bottom type (D type)
Suitable for high-speed centrifugal discharge
Recommended minimum bucket spacing: width of the bucket projection B+25mm, which can be appropriately reduced according to elevator capacity requirement.
Recommended elevator velocity ¡Ü 2.5m/s
Recommend usingZ-Y+10 as usable capacity for engineering purpose.
Low profile type (S type)
Follow the outline structure design of D type bucket, it has good features as higher intensity, more wear resistance, extended life span. Compare to D bucket, S bucket with low profile can be installed with less spacing, thus increase the elevator capacity.
Suitable for high-speed elevator or light bulk material lifting.
Recommended minimum bucket spacing: width of the bucket projection B+25mm, which can be appropriately reduced according to elevator capacity requirement.
Recommended elevator velocity ¡Ü3.5m/s
Recommend usingZ-Y+5 as usable capacity for engineering purpose.
ENGOREPROD 974-2574 20081205
Send to a friend
Copyright © 1999-2008 Engormix.com - All Rights Reserved
|
|
|
This company has no videos published. |
|
This company has no articles published. |
|
This company has no professionals registered. |
|
This company has no participation in forums. |
|
This company has no news published. |
|
This company has no participation at events. |
|